TPS65983BAZQZR UART Interface IC USB Interface IC ACE C0 MM PRODUCTION

TPS65983BAZQZR UART Interface IC USB Interface IC ACE C0 MM PRODUCTION

1 Features

• USB Power Delivery (PD) Controller

• – Supports PD2.0 and PD3.0 specifications.

• – Supports Fast Role Swap

• – Mode Configuration for Source (Host), Sink (Device), or Source-Sink

• – Bi-Phase Marked Encoding/Decoding (BMC)

• – Physical Layer and Policy Engine

• – Configurable at Boot and Host-Controlled

• USB Type-C Specification Compliant

  • – Cable Orientation and Role Detection

  • – Assign CC and VCONN Pins

  • – Advertise Default, 1.5 A or 3 A for Type-C Power

• Port Power Switch

  • – 5-V, 3-A Switch to VBUS for Type-C Power

  • – 5-V to 20-V, 3-A Bidirectional Switch to or from VBUS for USB PD Power

  • – 5-V, 600-mA Switches for VCONN

  • – Overcurrent Limiter, Overvoltage Protector

  • – Slew Rate Control

  • – Hard Reset Support

• Port Data Multiplexer

  • – USB 2.0 HS Data, UART Data, and Low Speed Endpoint

  • – Sideband Use Data for Alternate Modes (DisplayPort and ThunderboltTM)

• Power Management

• – Gate Control and Current Sense for External 5-V to 20-V, 5-A Bidirectional Switch (Back-to- Back NFETs)

• – Power Supply from 3.3-V or VBUS Source

• – 3.3-V LDO Output for Dead Battery Support

• BGA MicroStar Junior Package and NFBGA Package

• – 0.5-mm Pitch

• – Through-Hole Via Compatible for All Pins

2 Applications

• Thunderbolt 3 Devices

3 Description

The TPS65983B is a stand-alone USB Type-C and Power Delivery (PD) controller providing cable plug and orientation detection at the USB Type-C connector. Upon cable detection, the TPS65983B communicates on the CC wire using the USB PD protocol. When cable detection and USB PD negotiation are complete, the TPS65983B enables the appropriate power path and configures alternate mode settings for internal and (optional) external multiplexers.

Device Information